DC Breaks

Coaxial DC-Break 4.3-10 male screw 4.3-10 female IP67 33-4000 MHz 5000-6000 MHz inner/outer conductor separated

BN:

432054F001

VSWR, max.:

2.10 @ 33 to 80 MHz
1.40 @ 80 to 100 MHz
1.30 @ 100 to 300 MHz
1.10 @ 300 to 1880 MHz
1.20 @ 1880 to 2700 MHz
1.25 @ 2700 to 3800 MHz
1.35 @ 3800 to 4000 MHz
1.40 @ 5000 to 6000 MHz

Insertion loss max.:

0.60 dB @ 33 to 80 MHz
0.25 dB @ 80 to 3800 MHz
0.60 dB @ 3800 to 4000 MHz
0.60 dB @ 5000 to 6000 MHz

Passive intermodulation (IM3), max.:

-160 dBc

Show price

Compare

Coaxial DC-Break 4.3-10 male screw 4.3-10 female IP67 33-4000 MHz 5000-6000 MHz inner conductor separated

BN:

432067F001

VSWR, max.:

2.10 @ 33 to 80 MHz
1.40 @ 80 to 100 MHz
1.30 @ 100 to 300 MHz
1.10 @ 300 to 1880 MHz
1.20 @ 1880 to 2700 MHz
1.25 @ 2700 to 3800 MHz
1.35 @ 3800 to 4000 MHz
1.40 @ 5000 to 6000 MHz

Insertion loss max.:

0.60 dB @ 33 to 80 MHz
0.25 dB @ 80 to 3800 MHz
0.60 dB @ 3800 to 4000 MHz
0.60 dB @ 5000 to 6000 MHz

Passive intermodulation (IM3), max.:

-160 dBc

Show price

Compare

Coaxial DC-Break 7-16 male 7-16 female IP67 33-4000 MHz 5000-6000 MHz inner/outer conductor separated

BN:

766436F001

VSWR, max.:

2.10 @ 33 to 80 MHz
1.40 @ 80 to 100 MHz
1.30 @ 100 to 300 MHz
1.10 @ 300 to 1880 MHz
1.20 @ 1880 to 2700 MHz
1.25 @ 2700 to 3800 MHz
1.35 @ 3800 to 4000 MHz
1.40 @ 5000 to 6000 MHz

Insertion loss max.:

0.60 dB @ 33 to 80 MHz
0.25 dB @ 80 to 3800 MHz
0.60 dB @ 3800 to 4000 MHz
0.60 dB @ 5000 to 6000 MHz

Passive intermodulation (IM3), max.:

-160 dBc

Show price

Compare

Coaxial DC-Break N male N female IP67 33-4000 MHz 5000-6000 MHz inner/outer conductor separated

BN:

950720F001

VSWR, max.:

2.10 @ 33 to 80 MHz
1.40 @ 80 to 100 MHz
1.30 @ 100 to 300 MHz
1.10 @ 300 to 1880 MHz
1.20 @ 1880 to 2700 MHz
1.25 @ 2700 to 3800 MHz
1.35 @ 3800 to 4000 MHz
1.40 @ 5000 to 6000 MHz

Insertion loss max.:

0.60 dB @ 33 to 80 MHz
0.25 dB @ 80 to 3800 MHz
0.60 dB @ 3800 to 4000 MHz
0.60 dB @ 5000 to 6000 MHz

Passive intermodulation (IM3), max.:

-155 dBc

Show price

Compare

DC Breaks protect your transmission line

Mobile communication systems are constantly at risk of being adversely affected or damaged by over voltages, induced DC voltages etc. Protective devices such as surge protectors and DC breaks are used to offset these external influences. Both have the job of safeguarding the connected system without interfering with its operation. Products from SPINNER are excellent suited for protecting mobile communication installations, due to their low PIM, attenuation and reflection. Our protective devices are available with a choice of 7-16, 4.3-10 or N connector.

DC breaks prevent the propagation of direct current or of signals with low transmission frequencies while allowing RF transmission to proceed smoothly at the same time. SPINNER delivers two types of DC breaks:

• Types with open inner and outer conductor: They are mainly used for preventing undesirable induced voltage, in communication equipment, e.g. radiating cables. Inducted voltages are generated by e.g. high-power lines in underground train systems.
• Types with open inner conductor only: They are mainly used for shielding antennas or ground stations from low-frequency signals deliberately fed in for controlling mobile communication antennas or for the power supply of tower mounted amplifiers.

Benefits of SPINNER DC breaks for your mobile radio network

• Ensure signal integrity: The DC block separates direct current from high-frequency signals, improving signal quality and integrity. This is crucial for reliable communication in mobile networks.
• Protection against damage: By isolating direct current, engineers can ensure that radio frequency circuits are not damaged by unwanted current. This helps to extend the life of the infrastructure.
• Improved performance: A clean radio frequency signal, free from DC, can improve the performance of mobile devices and networks, resulting in better transmission quality and higher network performance.
• Compatibility and reliability: The specific DC block is equipped with interfaces commonly used in cellular applications. The robust design and protection class make it robust and reliable, even in demanding outdoor and tunnel environments.

If you can’t find your DC-break according to your specifications online, please contact our sales team with the specification needed per email or select one of the displayed DC-Breaks for a Quote Request and add your special requirements in the comment field of the form before submitting.