N male push-pull to N female 4-hole panel mounting DC-6 GHz precision adapter EasyDock

The support for this product ends at 12/30/23 11:00 PM.

SPINNER adapters offer outstanding electrical and mechanical properties

Adapters are used to connect transmission lines with of different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter).

SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors. The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request.

The SPINNER N male push-pull to N female 4-hole panel mounting DC-6 GHz precision adapter EasyDock is characterized by and its longevity for test and measurement laboratories. A SPINNER precision adapter increases the lifetime of the connector of the analyzer considerably and thus saves money in the long term.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

A N male push-pull to N female 4-hole panel mounting DC-6 GHz precision adapter EasyDock enables you to reliably transmit radio-frequency signals in the frequency range from DC to 6 GHz.

The adaptor offers a transition from interface N male to interface N female. The connector has a straight direction.

4-hole panel mounting connectors enable wall mounting e.g. on housings. 4-hole panel connectors are inserted into an appropriately prepared notch or bore. On a mounting plate that is perpendicular to the direction of the connector, there are four holes for fastening the connector with screws.

The N-coaxial connectors were named after their inventor Paul Neill, who developed this standard for RF connectors in 1942. Often, however, the name also relates to the Navy Connector. Type N connectors can be used at frequencies up to 11 GHz, high-precision types up to 18 GHz. It is typically used in mobile communication applications with demanding mechanical and electrical requirements. SPINNER exclusively manufactures connectors with non-slotted outer conductor contacts and a special sealing profile in the connector head instead of the flat seal disk, specified by IEC or CECC. This ensures the most reliable sealing function.

The push-pull connection is quick and easy to loosen and yet provides enough grip and a secure fit. In addition, the center slots in the contacts provide high contact pressure between the cable and the connector for optimum conductivity and signal strength.

RF characteristics

Number of interfaces:
Interface type:
N male (50 Ω) per IEC 61169-16 [push-pull]
N female (50 Ω) per IEC 61169-16
Interface direction:
Mounting type:
Port 2: 4-hole panel mounting
Frequency range:
DC to 6 GHz
VSWR, max.:
1.02 @ DC to 2 GHz
1.06 @ 2 to 6 GHz

Mechanical characteristics

10,000 1)
Contact force during measurement, approx.:
80 N (at stroke 2 mm)
Required stroke during measurement:
1.5 mm to 6 mm
Inner conductor material / surface coating:
CuBe age hardened / gold-plated
copper-alloy / gold-plated
CuBe / silver-plated
copper-alloy / silver-plated
Outer conductor material / coating:
copper-alloy / gold-plated
copper-alloy / silver-plated
CuBe / gold-plated
Insulation material:
cross linked polystyrene

Environmental conditions

Operational environment:
Ambient temperature:
+5 to +40 °C

Further remarks

Sales Article Number:
In order to ensure best possible measurement result, cleaning has to be assessed and executed by professional staff on a regular basis.
Values for misalignments might vary in case multiple misalignments have to be adjusted at the same time.
Customs tariff number:



Product data sheet – 950708 – CAEN-DS.pdf