7-16 female bulkhead mounting to 7-16 female adapter

920400

SPINNER adapters offer outstanding electrical and mechanical properties

Adapters are used to connect transmission lines with different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter).

SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors. The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request.

The SPINNER 7-16 female bulkhead mounting to 7-16 female adapter guarantees excellent, lossless mobile communication quality for use in in-building distributed antenna systems (DAS) or on mobile communication base stations outdoors.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

A 7-16 female bulkhead mounting to 7-16 female adapter enables you to reliably transmit radio-frequency signals in the frequency range from DC to 8 GHz.

The adaptor offers a transition from interface 7-16 female to interface 7-16 female. The connector has a straight direction.

Bulkhead mounting connectors enable wall mounting e.g. on housings. 1-hole connectors are inserted into an appropriately prepared notch or bore on a housing wall and fastened there, e.g. by screwing.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
2
Interface type:
7-16 female (50 Ω) per IEC 61169-4
Interface direction:
straight
Mounting type:
Port 1: bulkhead mounting
Frequency range:
DC to 8 GHz
VSWR, max.:
1.02 @ DC to 1.0 GHz
1.04 @ 1.0 to 2.0 GHz
1.08 @ 2.0 to 4.0 GHz
1.25 @ 4.0 to 8.0 GHz

Mechanical characteristics

Inner conductor material / surface coating:
copper-alloy / silver-plated
Outer conductor material / coating:
copper-alloy / silver-plated
Insulation material:
PTFE
Sealing material:
silicone rubber
Degree of protection:
IP 68
Degree of protection remark:
connected with appropriate gasket
Weight, approx.:
220.0 g

Further remarks

Customs tariff number:
85366990