4 : 4 Hybrid combiner 694-2700 MHz 7-16 female DC port 1 to 5, 2 to 7, 3 to 6, 4 to 8


SPINNER Combining Units for best radio frequency networks performance

Combining units are essential components in radio frequency networks, used to merge signals from multiple sources or split signals into multiple paths while maintaining signal integrity. All combiners work in bi-directional mode and can therefore be used to combine and split the transmitted and received signals.

The 4 : 4 Hybrid combiner 694-2700 MHz 7-16 female DC port 1 to 5, 2 to 7, 3 to 6, 4 to 8 guarantees excellent, lossless mobile communication quality for use in in-building distributed antenna systems (DAS) or on mobile communication base stations outdoors.

A hybrid combiner is a device that combines two or more input signals into a single output or to multiple outputs while maintaining the isolation between the input ports. This combiner uses hybrid couplers, which are passive devices that can split or combine signals with minimal loss and high isolation. Hybrid combiners are particularly useful in applications where signals from multiple transmitters need to be combined efficiently without interfering with each other, thus optimizing the use of available spectrum, and reducing equipment costs.

Typical applications are:

  • In-Building Distributed Antenna Systems (DAS): Hybrid combiners are commonly used in large buildings, stadiums, airports, and other indoor spaces. They allow multiple operators’ signals to be combined and distributed seamlessly.
  • Outdoor Base Stations: When deploying base stations in outdoor environments, hybrid combiners ensure efficient utilization of antenna resources.
  • Hybrid Networks: In scenarios where different wireless standards (e.g., GSM, 3G, LTE, 5G, 6G) coexist, hybrid combiners enable smooth signal sharing.

Critical characteristics are:

  • Low insertion loss: minimizing signal loss during combining ensures optimal network performance.
  • Excellent signal isolation: high isolation between input ports prevents interference.
  • Superior intermodulation properties: hybrid combiners must handle multiple signals without introducing distortion.
  • Robust construction: outdoor versions withstand environmental conditions (temperature, humidity).
  • Indoor and outdoor installation capability: flexibility for various deployment scenarios.

Benefits are:

  • Efficient spectrum utilization: hybrid combiners optimize spectrum usage by allowing multiple services to share a common antenna.
  • Compatibility with various mobile communication systems: They accommodate different wireless standards.
  • Cost-effectiveness: Shared infrastructure reduces costs for operators and building owners.
  • Quick deployment: easy installation speeds up network rollout.

SPINNER’s hybrid combiners excel in reliability, performance, and adaptability. Our products are recommended because they provide a seamless solution for both indoor and outdoor mobile communication networks. Whether enhancing in-building coverage or expanding network capacity, SPINNER’s Hybrid Combiners offer a reliable backbone for efficient signal sharing.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The 4 : 4 Hybrid combiner 694-2700 MHz 7-16 female DC port 1 to 5, 2 to 7, 3 to 6, 4 to 8 enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 500 W (per port) with maximum passive intermodulation (IM3) of -160 dBc.

The protection class is IP 65.

The port path designation regarding main line and probe is as follows: Port 1, 2, 3, 4: input, Port 5, 6, 7, 8: output

It supports the use of the following frequency bands : 700, 800, 900, 1500, 1800, 2100, 2300, 2400, 2600

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
Interface type:
7-16 female (50 Ω) per IEC 61169-4
Port / path designation:
Port 1, 2, 3, 4: input
Port 5, 6, 7, 8: output
Interface direction:
Input : output ratio:
4 : 4
Combiner type:
Hybrid Combiner
Mobile communication
Frequency range:
694 to 2700 MHz
Frequency band:
1800, 2600, 1500, 2400, 2300, 700, 2100, 800, 900
Average power rating:
500 W (per port)
Test voltage rating:
500 V
VSWR, max.:
1.10 @ 694 to 2500 MHz
1.12 @ 2500 to 2700 MHz
Insertion loss max.:
6.1 dB @ 694 to 800 MHz (± 0.9 dB including nominal 6 dB splitting losses)
6.1 dB @ 800 to 2700 MHz (± 0.6 dB including nominal 6 dB splitting losses)
Isolation, min.:
30 dB
Isolation, typ.:
32 dB
Passive intermodulation (IM3), max.:
-160 dBc
Passive intermod. (IM3), typ.:
-165 dBc
Port 1 ↔ Port 5
Port 2 ↔ Port 7
Port 3 ↔ Port 6
Port 4 ↔ Port 8
max. 6.5 A
AISG Standard, 2.0, § 6.4

Mechanical characteristics

no painting
Degree of protection:
IP 65
Degree of protection remark:
Weight, approx.:
5.5 kg
Dimensions remark:
see drawing on data sheet

Environmental conditions

Environmental conditions:
ETSI EN 300019-1-1 Class 1.2
ETSI EN 300019-1-2 Class 2.3
ETSI EN 300019-1-4 Class 4.1E
Operating temperature:
-40 to +55 °C
Storage ambient temperature:
-40 to +85 °C

Scope of delivery & accessories

Mounting accessoires:
part of delivery

Further remarks

Customs tariff number:



Product data sheet – 570538 – 570538-DS.pdf


Model – 570538 – iBwave VEX file – 570538-MS.vex