Surge Protectors protect your transmission lines
Mobile communication systems are constantly at risk of being adversely affected or damaged by overvoltages, induced DC voltages etc. Protective devices such as surge protectors are used to offset these external influences.
They have the job of safeguarding the connected system without interfering with its operation. Products from SPINNER are excellent suited for protecting mobile communication installations, due to their low PIM, attenuation and reflection.
Overvoltages are typically the result of electromagnetic induction because of events such as lightning strikes. A reliable protection against surges is given only by a proper installation and regular maintenance depending on the protector type. The maintenance intervals depend mainly upon the number and the strength of the impulse current impacts.
The Surge protector 4.3-10 male screw to 4.3-10 female bulkhead 850 W 698-3800 MHz quarter wavelength stub with DC break guarantees excellent, lossless mobile communication quality for use in in-building distributed antenna systems (DAS) or on mobile communication base stations outdoors.
A surge protector with quarter wavelength stub and DC Break provides an internally separated inner conductor which improves the protection effect and extends the bandwidth. Therefore, the whole frequency range of the most common mobile communication bands and W-LAN data transmission accord. to IEEE 802.11b/g or Bluetooth can be covered by one protector only. On the other hand, the DC break type is asymmetric, i.e. there are defined ports for the antenna and for the protected transceiver side.
Outstanding RF characteristics, best possible passive intermodulation and VSWR
The Surge protector 4.3-10 male screw to 4.3-10 female bulkhead 850 W 698-3800 MHz quarter wavelength stub with DC break enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 850 W @ 698 MHz, 430 W @ 2700 MHz, 150 W @ 3800 MHz with maximum passive intermodulation (IM3) of -165 dBc.
The protection class is IP 67.
The product offers a transition from interface 4.3-10 male to interface 4.3-10 female.
The screw connection, especially when mounted with a suitable torque wrench, provides the strongest hold and a constantly secure fit of the cable. In addition, the center slots in the contacts provide high contact pressure between the cable and the connector for optimum conductivity and signal strength.
Delivery scope: The delivery of the product contains the following items: panel sealing, washer, nut, installation and grounding instructions
