SISO 1-port V-Pol Bi-Dir in-building antenna 698-4000 MHz 6 dBi  4.3-10 female product photo Front View L
For a larger view click on the picture.

SISO 1-port V-Pol Bi-Dir in-building antenna 698-4000 MHz 6 dBi 4.3-10 female

666000

SPINNER in-building antennas offer very good electrical properties

The two main requirements for in-building antennas are: as inconspicuous as possible for maximum mobile network coverage in e.g. shopping centers, hospitals, trade fairs, airports, hotels, schools and universities, office buildings, underground car parks and other interiors. All SPINNER in-building antennas have 4.3-10 connectors and offer very good electrical properties over their respective specified frequency ranges starting from 380 MHz (Tetra) to 6000 MHz (WLAN).

Balanced, cost-effective and future-proof antenna portfolio

The SISO 1-port V-Pol bi-directional in-building antenna 698-4000 MHz 6 dBi 4.3-10 female (IM -150 dBc) integrates perfectly into the existing DAS (Distributed Antenna System) portfolio, considering broadband technologies and cost-effectiveness. With technically diverse omni- and panel designs, which are suitable for either ceiling or wall mounting, SPINNER offers its customers a balanced, cost-effective and future-proof antenna portfolio.

Excellent mobile communication quality

The space-saving and flat Radom design of this 1-port (Single-In Single-Out) bi-directional antenna meets one of the two essential requirements, namely, to keep the visual impact as low as possible, very well. The vertical-polarized dipole technology used provides a good price-performance ratio while maintaining good directional characteristics of the antenna radiation diagrams. This ensures excellent mobile communication quality in the frequency range from 698 to 4000 MHz in distributed antenna systems (DAS) indoors. The simple and fast wall or mast mounting of the SISO 1-port V-Pol bi-directional in-building antenna 698-4000 MHz 6 dBi 4.3-10 female is done with the included mounting kit (2 mast brackets, 3 screws and 3 plugs). The use of the IM-stable 4.3-10 connector system ensures the best possible passive intermodulation (PIM) of the product and thus also for the entire in-building distribution system.

RF characteristics

Number of interfaces:
1
Interface type:
4.3-10 female (50 Ω) per IEC 61169-54
Interface direction:
straight
Frequency range:
698 to 4000 MHz
Frequency band:
1800, 2600, 2300, 700, 2100, 800, 900, 3800, 1900
Average power rating:
50 W
Antenna gain:
4.0 dBi @ 698 to 960 MHz (±1.0)
5.5 dBi @ 1710 to 2700 MHz (±1.0)
6.0 dBi @ 3300 to 4000 MHz (±1.0)
Polarization:
vertical
Horizontal beamwidth:
150 ° @ 698 to 960 MHz (±20)
160 ° @ 1710 to 2700 MHz (±20)
160 ° @ 3300 to 4000 MHz (±20)
Vertical beamwidth:
60 °
VSWR, max.:
2.0
Passive intermodulation (IM3), max.:
-150 dBc

Mechanical characteristics

Housing material / coating:
Fiberglass
Colour:
white (RAL 9003)
Degree of protection:
IP 54
Degree of protection remark:
indoor
RoHS compliance:
compliant
Flammability rating:
UL 94-V0
Fire load:
3.61 kWh
Weight remark:
without mounting kit
Length:
305.0 mm
Width:
85.0 mm
Height:
190.0 mm

Environmental conditions

Operating temperature:
-55 to +60 °C
Relative humidity, max.:
95%

Further remarks

Customs tariff number:
85177100

Downloads

666000-DS.pdf

Product data sheet – 666000 – 666000-DS.pdf

666000-MS.vex

Model – 666000 – iBwave VEX file – 666000-MS.vex

10020052.pdf

Installation instructions – 666000 – 10020052.pdf