Returning Users

New Users

BN: 535742

Number of interfaces:: 12
Interface type:: 1.0 mm male (50 Ω) per IEC 61169-31
1.0 mm female (50 Ω) per IEC 61169-31
Interface direction:: straight
Frequency range:: DC to 116.5 GHz
(resonance free up to 120 GHz)
Power rating, max. LOAD:: 50.0 mW
Return loss, min. THROUGH:: 27 dB @ DC to 10 GHz
24 dB @ 10 to 26.5 GHz
21 dB @ 26.5 to 50 GHz
18 dB @ 50 to 70 GHz
15 dB @ 70 to 90 GHz
12 dB @ 90 to 116.5 GHz
Return loss, min. LOAD:: 31 dB @ DC to 10 GHz
25 dB @ 10 to 26.5 GHz
22 dB @ 26.5 to 70 GHz
17 dB @ 70 to 116.5 GHz
Insertion loss, max. THROUGH:: 0.7 dB
Insertion loss stability typ.:: 0.5 dB
DC-resistance LOAD:: 50 Ω (±0.5 Ω)

Inner conductor material / surface coating:: CuBe age hardened / gold-plated
Outer conductor material / coating:: copper alloy / gold-plated
Insulation material:: PS
Weight, approx.:: 1.4 kg
Marking:: laser engraving

Operating temperature:: +18 to +28 °C 1)
Relative humidity, max.:: 95% (non-condensing)
Storage ambient temperature:: -40 to +70 °C (according to EN 60068-2-1 and EN 60068-2-2)
Storage relative humidity, max.:: 95% (non-condensing)

Delivery scope:: 1 x 1.0 mm open circuit plug (BN 535733, factory calibration option)
1 x 1.0 mm open circuit socket (BN 535734, factory calibration option)
1 x 1.0 mm short circuit plug (BN 535735, factory calibration option)
1 x 1.0 mm short circuit socket (BN 535736, factory calibration option)
1 x 1.0 mm load plug (BN 535737, factory calibration option)
1 x 1.0 mm load socket (BN 535738, factory calibration option)
1 x 1.0 mm through plug / plug (BN 535739, factory calibration option)
1 x 1.0 mm through socket / socket (BN 535740, factory calibration option)
1 x 1.0 mm through plug / socket (BN 535741, factory calibration option)
1 x torque wrench 6 mm / 45 N cm (BN 238748C0001, factory calibration option)
1 x torque wrench 6 mm / 34 N cm (BN 238749C0001, factory calibration option)
1 x double open-ended spanner 7 mm (BN 238750)

calibration certificate, USB-flash drive with calibration data and documentation, handling instruction torque wrench, aluminum storage case

Footnote:: Calibration data:
Calibration data includes determined S-parameters for OPEN, SHORT and LOAD standards to achieve best possible performance.

Re-Calibration
The suggested initial interval for recalibration is 12 months or 500 matings, whichever comes first. The actual need for recalibration depends on the use and the maintenance of the kit. The recalibration interval should begin with the day of initial use after recalibration.

Pin Depth Limits:
Pin depth is the distance between outer conductor mating plane and inner conductor mating plane. Negative values stand for protrusion of the inner conductor, positive values for recession.
Customs tariff number:: 90309000