Coaxial jumper cable assembly SF 1/2"-50-PE 7-16 male 7-16 male 2 m product photo Front View L
For a larger view click on the picture.

Coaxial jumper cable assembly SF 1/2"-50-PE 7-16 male 7-16 male 2 m

J53388

SpinnerFlex®TopFit - ideal for signal transmission between base stations and antennas

SpinnerFlex®TopFit pre-fabricated coaxial cables (jumper cable assemblies) are the ideal solution for radio frequency signal transmission between base stations and antennas. They offer top-quality design, materials and manufacturing, ensuring optimal connectivity, easy installation, and fault-free functioning, even under extremely harsh environmental conditions.

A coaxial jumper cable assembly SF 1/2"-50-PE 7-16 male 7-16 male 2 m is a high quality, super flexible corrugated cable of the size SF 1/2". It provides a reliable and stable transmission of radio frequency signals in the frequency range DC to 5825 MHz. The cable is optimally shielded against interference, providing excellent, loss-free mobile communication quality for use in in-building distributed antenna systems (DAS) or in mobile communication base stations. In addition, a prefabricated coaxial jumper cable assembly SF 1/2"-50-PE 7-16 male 7-16 male 2 m is also suitable for a variety of demanding industrial applications or broadcast.

Outstanding IM characteristics with maximum passive intermodulation

A SPINNER coaxial jumper cable assembly SF 1/2"-50-PE 7-16 male 7-16 male 2 m guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -160 dBc and low VSWR values over the entire frequency range and during the entire operating time of the cable. The robust construction defies even harsh outdoor conditions and for a temperature range from -55 to +85 °C. SPINNER coaxial cable assemblies comply with the RoHS 2002/95 Directive. The length of the cable is 2.0 m. The rugged coaxial cable has inner conductors made of copper, a PE dielectric insulation and a copper outer conductor. Inner and outer conductors are soldered 360° inductively. The degree of protection IP68 according to IEC 60529 is guaranteed. A coaxial jumper cable assembly SF 1/2"-50-PE 7-16 male 7-16 male 2 m has 7-16 male connectors pre-mounted on both sides of the cable.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
2
Interface type:
7-16 male (50 Ω) per IEC 61169-4
Interface direction:
straight
Waveguide size:
SF 1/2
Frequency range:
DC to 5825 MHz 3)
Average power rating:
0.91 kW @ 960 MHz (at 40 °C ambient temperature)
0.56 kW @ 2200 MHz (at 40 °C ambient temperature)
0.49 kW @ 2700 MHz (at 40 °C ambient temperature)
0.42 kW @ 3800 MHz (at 40 °C ambient temperature)
0.31 kW @ 5825 MHz (at 40 °C ambient temperature)
VSWR, max.:
1.05 @ DC to 960 MHz
1.06 @ 960 to 2200 MHz
1.10 @ 2200 to 2700 MHz
1.12 @ 2700 to 3800 MHz
1.18 @ 3800 to 5825 MHz 2)
VSWR, typ.:
1.03 @ DC to 960 MHz
1.05 @ 960 to 2200 MHz
1.06 @ 2200 to 2700 MHz
1.10 @ 2700 to 3800 MHz
1.14 @ 3800 to 5825 MHz 2)
Insertion loss coefficient /100m:
11.56 dB @ 960 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
18.64 dB @ 2200 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
21.06 dB @ 2700 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
25.90 dB @ 3800 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
33.79 dB @ 5825 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Passive intermodulation (IM3), max.:
-160 dBc 1)
Passive intermod. (IM3), typ.:
-165 dBc 1)

Mechanical characteristics

Cable type:
SF 1/2"-50-PE
Crush resistance:
20.4 N/mm
Recommended clamp spacing:
800 mm
Single bending radius, min.:
25 mm
Repeated bending radius, min.:
32 mm
Inner conductor:
Cu-alloy / Ag-plated
Outer conductor material / surface:
Cu-alloy / Ag-plated
Cable jacket material:
PE black (grey jacket available on request)
Other metal parts material / surface:
Cu-alloy / Ni-plated
Insulation:
PTFE, PE
Housing sealing:
Silicone rubber
IP protection level:
IP 68
IP protection level remark:
0.1 bar / 6 hours / unmated
1 bar / 1 hour / mated
RoHS 2011/65/EU:
compliant to directive 2011/65/EU and amendment (EU) 2015/863
RoHS compliance:
compliant
Cable jacket:
Halogen-free according to IEC 60754-1 and IEC 60754-2
Length:
2.0 m
Outer jacket diameter, nom.:
13.7 mm
Length Tolerances:
±25 mm

Environmental conditions

Installation temperature range:
-40 °C to +60 °C
Operating temperature:
-55 °C to +85 °C
Storage ambient temperature:
-70 °C to +85 °C

Further remarks

1):
Jumper cables with improved IM3 values are available on request.
2):
The given VSWR values are maintained within all global cellular frequency bands.
3):
Extended frequency range for premium quality. Please specify before order.

Downloads

7M7M2-MS.vex

Model – J53388 – iBwave VEX file – 7M7M2-MS.vex

JC-DS.pdf

Product data sheet – J53388 – JC-DS.pdf

M30804.pdf

Handling instructions – J53388 – M30804.pdf