1. Home/
  2. Coaxial 2-way switching unit 130 W DC-1500 MHz 12 VDC N female
Coaxial 2-way switching unit 130 W DC-1500 MHz 12 VDC N female product photo Front View L
For a larger view click on the picture.

Coaxial 2-way switching unit 130 W DC-1500 MHz 12 VDC N female

512663
Not available This product is discontinued.

RF characteristics

Number of interfaces:
6
Interface type:
N female (50 Ω) per IEC 61169-16
Interface direction:
straight
Frequency range:
DC to 1500 MHz
Average power rating:
130 W 2)
Proof voltage rating:
1000 V
Proof voltage rating remark:
2)
Return loss min.:
30 dB @ DC to 864 MHz (shortest path)
22 dB @ 864 to 1500 MHz (shortest path)
27 dB @ DC to 864 MHz (longest path)
22 dB @ 864 to 1500 MHz (longest path)
Insertion loss max.:
0.25 @ DC to 864 MHz (shortest path)
0.35 @ 864 to 1500 MHz (shortest path)
0.4 @ DC to 864 MHz (longest path)
0.5 @ 864 to 1500 MHz (longest path)
Isolation, min.:
45 dB @ DC to 864 MHz
40 dB @ 864 to 1500 MHz

Electrical characteristics

Switch type:
built-in
Switch actuator type:
solenoid drive, latching
Mains connector designation:
J2
Mains connection:
3 pole snap-in connector Binder series 720
Power consumption, approx.:
20 W (maximum while switching)
Mains fuses:
The power supply lines must be externally fused by time-delay, 2 A
Operating voltage:
10.8 to 26.4 V DC
Operating voltage remark:
input is potential-free, SELV (according to EN-60950-1)
Control connector designation:
J1
Control connection:
Sub-D, 25 pole, male (according to DIN 41652 / IEC 807-2), 4 input lines (2 per switch), potential-free, either polarity in respect to "COMIN
Control voltage rating remark:
SELV circuits according to IEC EN 60950-1
Control current, max.:
≥ 5 mA (1 mA to 5 mA, depending on input voltage)
Control fuses:
The circuit must be externally limited to 100 mA
Local signaling:
2 bicolor LEDs, green: TX An to OUTn, amber: TX B to OUTn
1 green LED: Ready, no failure
Signaling connector designation:
J1
Signaling connection:
Sub-D, 25 pole, male (according to DIN 41652 / IEC 807-2), 6 output lines (2 per TX A, 1 to TX B, 1 Ready), potential-free contacts, all contacts in respect to "COMOUT
Signaling voltage:
≥ 50 V DC
Signaling current, max.:
100 mA
Signaling resistance, max.:
15 Ω
Signaling resistance, typ.:
6 Ω
Signaling fuses:
The circuit must be externally limited to 100 mA
Switching time, max.:
100.0 ms
Switch command hold time, min.:
0.1 s

Mechanical characteristics

Lifetime:
100,000 cycles
Degree of protection:
IP 30
Degree of protection remark:
according to EN-60529 / VDE 0470-1
Protection class:
III (according to EN-60950-1)
Weight, approx.:
3.5 kg
Dimensions remark:
1 RU plug-in module for a 19" rack or a compact box

Environmental conditions

Operational environment:
indoor only, maximum altitude 2286 m / 7500 ft above sea level for operation at indicated power
Operating temperature:
-10 to +50 °C
Relative humidity, max.:
95% (condensation not allowed)
Storage ambient temperature:
-25 to +70 °C
Storage relative humidity, max.:
95% (condensation not allowed)

Further remarks

1):
Suitable mating connector included
2):
Standard conditions:
- dielectric: Dry air under standard pressure
- temperature of the environment: Tenv = 40 °C
- at maximum altitude 2286 m / 7,500 ft above sea level, derating of input power at increasing altitude above 2286 m / 7,500 ft sea level: -1 % / 75 m respectively -1 % / 250 ft (referring to CECC 22000)
Customs tariff number:
85371098

Downloads

512663-DS.pdf

Product data sheet – 512663 – 512663-DS.pdf