7-16 male to 4.3-10 male screw adapter

432005

SPINNER adapters offer outstanding electrical and mechanical properties

Adapters are used to connect transmission lines with of different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter).

SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors. The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request.

The SPINNER 7-16 male to 4.3-10 male screw adapter guarantees excellent, lossless mobile communication quality for use in in-building distributed antenna systems (DAS) or on mobile communication base stations outdoors.

7-16 male to 4.3-10 male screw adapter enables you to reliably transmit radio-frequency signals in the frequency range from DC to 6 GHz.This SPINNER adapter guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -165 dBc and low VSWR.

The adaptor offers a transition from interface 7-16 male to interface 4.3-10 male. The connector has a straight direction.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

The 4.3-10 connector system was designed to meet the latest requirements in mobile communication in terms of size, robustness, performance, and other parameters. Its small footprint supports the use of smaller components, mitigates risks if equipment is assembled without due care, and delivers outstanding electrical performance.

The screw connection, especially when mounted with a suitable torque wrench, provides the strongest hold and a constantly secure fit of the cable. In addition, the center slots in the contacts provide high contact pressure between the cable and the connector for optimum conductivity and signal strength.

RF characteristics

Number of interfaces:
2
Interface type:
7-16 male (50 Ω) per IEC 61169-4
4.3-10 male (50 Ω) per IEC 61169-54 [screw]
Interface direction:
straight
Mounting type:
none
Frequency range:
DC to 6 GHz
VSWR, max.:
1.02 @ DC to 2 GHz
1.04 @ 2 to 3 GHz
1.08 @ 3 to 6 GHz
Passive intermodulation (IM3), max.:
-165 dBc

Mechanical characteristics

Inner conductor:
copper-alloy / silver-plated
Outer conductor material / surface:
copper-alloy / silver-plated
copper-alloy / CuSnZn-plated
Other metal parts material / surface:
copper-alloy / bright nickel-plated
Insulation:
PTFE
Housing sealing:
silicone rubber
IP protection level:
IP 68
IP protection level remark:
barrier and mating face sealed
Weight, approx.:
95.0 g

Downloads

432005-MS.vex

Model – 432005 – iBwave VEX file – 432005-MS.vex

432005-DS.pdf

Product data sheet – 432005 – 432005-DS.pdf