4.3-10 male screw to N male adapter

432024

SPINNER adapters offer outstanding electrical and mechanical properties

Adapters are used to connect transmission lines with different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter).

SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors. The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request.

The SPINNER 4.3-10 male screw to N male adapter guarantees excellent, lossless mobile communication quality for use in in-building distributed antenna systems (DAS) or on mobile communication base stations outdoors.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

A 4.3-10 male screw to N male adapter enables you to reliably transmit radio-frequency signals in the frequency range from DC to 6 GHz.This SPINNER adapter guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -165 dBc and low VSWR.

The adaptor offers a transition from interface 4.3-10 male to interface N male. The connector has a straight direction.

The 4.3-10 connector system was designed to meet the latest requirements in mobile communication in terms of size, robustness, performance, and other parameters. Its small footprint supports the use of smaller components, mitigates risks if equipment is assembled without due care, and delivers outstanding electrical performance.

The N-coaxial connectors were named after their inventor Paul Neill, who developed this standard for RF connectors in 1942. Often, however, the name also relates to the Navy Connector. Type N connectors can be used at frequencies up to 11 GHz, high-precision types up to 18 GHz. It is typically used in mobile communication applications with demanding mechanical and electrical requirements. SPINNER exclusively manufactures connectors with non-slotted outer conductor contacts and a special sealing profile in the connector head instead of the flat seal disk, specified by IEC or CECC. This ensures the most reliable sealing function.

The screw connection, especially when mounted with a suitable torque wrench, provides the strongest hold and a constantly secure fit of the cable. In addition, the center slots in the contacts provide high contact pressure between the cable and the connector for optimum conductivity and signal strength.

RF characteristics

Number of interfaces:
2
Interface type:
4.3-10 male (50 Ω) per IEC 61169-54 [screw]
N male (50 Ω) per IEC 61169-16
Interface direction:
straight
Mounting type:
none
Frequency range:
DC to 6 GHz
VSWR, max.:
1.02 @ DC to 2 GHz
1.04 @ 2 to 3 GHz
1.08 @ 3 to 6 GHz
Passive intermodulation (IM3), max.:
-165 dBc

Mechanical characteristics

Inner conductor material / surface coating:
copper-alloy / silver-plated
Outer conductor material / coating:
copper-alloy / CuSnZn-plated
Insulation material:
PTFE
Sealing material:
silicone rubber
Degree of protection:
IP 68
Degree of protection remark:
4.3-10 male barrier and mating face sealed
N mm male barrier and mating face sealed
Weight, approx.:
50.0 g

Further remarks

Customs tariff number:
85366910

Downloads

432024-DS.pdf

Product data sheet – 432024 – 432024-DS.pdf

432024-MS.vex

Model – 432024 – iBwave VEX file – 432024-MS.vex

REACH_Mobile_Communication_10123443-TD.pdf

Technical document – 432024 – REACH-Certificate for Mobile Communication Products – REACH_Mobile_Communication_10123443-TD.pdf

RoHS_Mobile_Communication_10123425-TD.pdf

Technical document – 432024 – RoHS-Certificate for Mobile Communication Products – RoHS_Mobile_Communication_10123425-TD.pdf