4.3-10 female bulkhead to 4.3-10 female adapter

432019

SPINNER adapters offer outstanding electrical and mechanical properties

Adapters are used to connect transmission lines with of different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter).

SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors. The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request.

The SPINNER 4.3-10 female bulkhead to 4.3-10 female adapter guarantees excellent, lossless mobile communication quality for use in in-building distributed antenna systems (DAS) or on mobile communication base stations outdoors.

4.3-10 female bulkhead to 4.3-10 female adapter enables you to reliably transmit radio-frequency signals in the frequency range from DC to 6 GHz.This SPINNER adapter guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -166 dBc and low VSWR.

The adaptor offers a transition from interface 4.3-10 female to interface 4.3-10 female. The connector has a straight direction.

Bulkhead mounting connectors enable wall mounting e.g. on housings. 1-hole connectors are inserted into an appropriately prepared notch or bore on a housing wall and fastened there, e.g. by screwing.

The 4.3-10 connector system was designed to meet the latest requirements in mobile communication in terms of size, robustness, performance, and other parameters. Its small footprint supports the use of smaller components, mitigates risks if equipment is assembled without due care, and delivers outstanding electrical performance.

RF characteristics

Number of interfaces:
2
Interface type:
4.3-10 female (50 Ω) per IEC 61169-54
Interface direction:
straight
Mounting type:
bulkhead mounting
Frequency range:
DC to 6 GHz
VSWR, max.:
1.02 @ DC to 2 GHz
1.04 @ 2 to 3 GHz
1.08 @ 3 to 6 GHz
Passive intermodulation (IM3), max.:
-166 dBc

Mechanical characteristics

Inner conductor:
copper-alloy / silver-plated
Outer conductor material / surface:
copper-alloy / silver-plated
copper-alloy / CuSnZn-plated
Other metal parts material / surface:
copper-alloy / CuSnZn-plated
Insulation:
PTFE
Housing sealing:
silicone rubber
IP protection level:
IP 68
IP protection level remark:
connected with appropriate gasket
Weight, approx.:
70.0 g

Downloads

432019-MS.vex

Model – 432019 – iBwave VEX file – 432019-MS.vex

432019-DS.pdf

Product data sheet – 432019 – 432019-DS.pdf