SPINNER loads offer outstanding electrical and mechanical properties
The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.
The 200 W load DC-4 GHz 7-16 female is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.
When used for in-building installation, a 200 W load DC-4 GHz 7-16 female allows you to ensure continuous power and power radiation of your antennas within your building.
Outstanding RF characteristics, best possible passive intermodulation and VSWR
The load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 200 W.
The load offers an interface 7-16 female.
SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.
The 200 W load DC-4 GHz 7-16 female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.
The protection class is IP 50.
The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.
RF characteristics
Number of interfaces:
1
Interface type:
7-16 female (50 Ω) per IEC 61169-4
Interface direction:
straight
Frequency range:
DC to 4 GHz
Average power rating:
200 W
VSWR, max.:
1.06 @ DC to 1 GHz 1.14 @ 1 to 2 GHz 1.20 @ 2 to 3 GHz 1.30 @ 3 to 4 GHz
Mechanical characteristics
Cooling type:
convection
Substrate material:
aluminum nitride (free of beryllium oxide)
Inner conductor material / surface coating:
copper-alloy / silver-plated
Outer conductor material / coating:
copper-alloy / silver-plated
Housing material / coating:
aluminum / untreated
Material:
aluminum (heat sink)
Surface Coating:
anodized black (heat sink)
Insulation material:
PTFE
Sealing material:
silicone rubber
Degree of protection:
IP 50
Weight, approx.:
2.7 kg
Length:
170.6 mm
Width:
180.0 mm
Height:
107.0 mm
Environmental conditions
Operating position:
any
Operating temperature:
-40 to +40 °C (at full power) 2)
Operating altitude, max.:
2286 m (at full power) 2)
Further remarks
Sales Article Number:
L200-7F
1):
Measuring point for surface temperature, see graph in data sheet
2):
The maximum power handling is reduced with rising ambient temperatures; for higher ambient temperature see Power Derating Curve in data sheet