100 W 30 dB attenuator 380-2700 MHz 7-16 female to N female low PIM

745147
Not available This product is discontinued.

SPINNER attenuators offer outstanding electrical and mechanical properties

The modular SPINNER system for attenuators offers you great flexibility in the selection of your components. It allows you to combine power, attenuation and connectors according to your individual requirements. The advantages are obvious: cost savings through standardisation and reliable technical quality.

The 100 W 30 dB attenuator 380-2700 MHz 7-16 female to N female low PIM is placed into the signal path and reduces the amplitude of the input signal by 30 dB. This reduces the output power and protects the transmitter of your installation from the effects of excessive power. You can individually combine your attenuator and adapt it to the requirements of your local installation.

When used for in-building installation, a 100 W 30 dB attenuator 380-2700 MHz 7-16 female to N female low PIM allows you to ensure continuous power and power radiation of your antennas within your building.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The attenuator enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 100 W.

A SPINNER 100 W 30 dB attenuator 380-2700 MHz 7-16 female to N female low PIM guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -140 dBc and low VSWR values over the entire frequency range and during the entire operating time.

The attenuator offers on one side an interface 7-16 female and on the other side an interface N female.

SPINNER attenuators can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitely stated in our product data sheets.

The 100 W 30 dB attenuator 380-2700 MHz 7-16 female to N female low PIM is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.

The protection class is IP 40.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

The N-coaxial connectors were named after their inventor Paul Neill, who developed this standard for RF connectors in 1942. Often, however, the name also relates to the Navy Connector. Type N connectors can be used at frequencies up to 11 GHz, high-precision types up to 18 GHz. It is typically used in mobile communication applications with demanding mechanical and electrical requirements. SPINNER exclusively manufactures connectors with non-slotted outer conductor contacts and a special sealing profile in the connector head instead of the flat seal disk, specified by IEC or CECC. This ensures the most reliable sealing function.

RF characteristics

Number of interfaces:
2
Interface type:
7-16 female (50 Ω) per IEC 61169-4
N female (50 Ω) per IEC 61169-16
Interface direction:
straight
Frequency range:
380 to 960 MHz
1710 to 2700 MHz
Average power rating:
100 W (at 25°C ambient temperature)
50 W (at 55°C ambient temperature)
VSWR, max.:
1.2
Insertion loss max.:
30 dB (±2 dB)
Passive intermodulation (IM3), max.:
-140 dBc @ 380 to 694 MHz
-150 dBc @ 694 to 800 MHz
-160 dBc @ 800 to 2700 MHz
Passive intermod. (IM3), typ.:
-145 dBc @ 380 to 694 MHz
-155 dBc @ 694 to 800 MHz
-165 dBc @ 800 to 2700 MHz

Mechanical characteristics

Cooling:
convection
IP protection level:
IP 40
Weight, approx.:
4.0 kg

Environmental conditions

Environmental conditions:
ETSI EN 300019-1-1 Class 1.2
ETSI EN 300019-1-2 Class 2.3
ETSI EN 300019-1-3 Class 3.3
Operating temperature:
-40 to +55 °C

Scope of delivery & accessories

Mounting accessoires:
to be ordered separately under BN B23463

Further remarks

Customs tariff number:
85332900

Downloads

745147-MS.vex

Model – 745147 – iBwave VEX file – 745147-MS.vex

745147-DS.pdf

Product data sheet – 745147 – 745147-DS.pdf